If you want to liven up a piece of clothing, accessory, luggage piece or perhaps hats you could sew on badges to get the new look easily Dogbadge.com/labradors/. Badges or patches when placed strategically can immediately replace the look of a garment or accessory and take it from boring to spunky in a matter of minutes. If you have children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult once you know the right way to do it.
To do this procedure for sewing on a badge, begin by placing the badge to the place in which you want it to be. Now secure the badge well with a few pins so that it stays in place and doesn’t shift while you’re sewing it on. Now if you are putting the patch on a garment, you have to fix the patch and after that try the garment on to be sure that the patch or the badge looks most suitable in the place. If your patch requires a little readjustment you can accomplish it at this point easily.
Now thread the needle making sure that the thread that you are using isn’t too long. Keep your thread within a length of approximately 18inches for easy maneuvering. If your thread is simply too long then you might get bothered by knots. Once you have the thread ready make a knot at the end of the thread. You can thread a needle by hand by holding the non knotted end in between your forefinger and thumb after which passing it through the eye of the needle. You may as well take the assistance of a needle threader if you find threading a needle in this way difficult.
Pass the needle through the badge and the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you began stitching keeping this distance from your last stitch all the time. Continue stitching round the entire perimeter of the badge until you have finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread using a single stitch. Pull the thread firmly to secure the knot after which cut-off any excess thread that’s left. Lastly remove extra safety pins that you were using to secure the patch in position.
You may as well sew on badges with the assistance of a sewing machine in case you don’t want to do the same yourself. Select a thread that matched the color of the patch after which tread your machine. You may also select a contrasting color with regards to the look that you want to present your badge. Once this is successfully done you should start sewing you badge. Use the top of the badge for your kick off point and sew all along the edge of your badge making use of the regular stitch mode ending at your starting point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready for usage together with the badge.